STRENX-en

hardox certifikat

Detailed parameters can be found on the supplier’s website:

STRENX HOT-ROLLED SHEET STEEL

QualityYield strength [MPa]Toughness at 20-mm thicknessBending properties t < 8 mm R/tYield strength/stress [MPa]Carbon equivalentThickness [mm]
MinMinMax
Strenx – high-strength steel that allows easier and more innovative assembly.
Strenx 700700(2)165 J/-40°C1.57809300.43/0.294-160(5)
Strenx 900900(2)88 J/-40°C2.594011000.55/0.364-100(5)
Strenx 960960(2)84 J/-40°C2.598011500.55/0.364-100
Strenx 1100110067 J/-40°C3.0125015500.55/0.364-40(5)
Strenx 1300130032 J/-40°C(3)3.5(4)140017000.65/0.424-10
All sheet metals are produced with a tolerance in line with Strenx® which is a guarantee of strength.
1. CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Cu + Ni)/15; CET = C + (Mn + Mo)/10 + (Cr + Cu)/10 + Ni/40 10 mm (8 mm above MPa)
2. Thickness of 4-53 mm
3. For a thickness of 6 mm, 1/2 testing sample shall be used
4. t < 6: 3.5 ŧ > 6: 40
5. Thicker materials are available upon request; Strenx 700:170 mm, Strenx 900:120 mm, Strenx 1100:50 mm up to 160 mm are available upon request.

 
 
 
 

STRENX HOT-ROLLED AND COLD-ROLLED STEEL

 

QualityYield strength [MPa]Yield strength/stress [MPa]Ductility A(5)[%]Bending radius of 90°
when bending 6 mm
Carbon
equivalent at
6-mm thickness
Thickness [mm]
MinMinMaxMinMin
Strenx 100 – 110 XF- thermo-mechanically rolled steel for cold forming,
used for light and heavy transport components and solutions
Strenx 100 XF100(1)110(1)15(2)1.21/2″-3/8 (3)
Strenx 100 XF110118(1)15(2)1.21/2″-3/8″ (3)
Strenx MC – vhigh-strength steel manufactured for cold forming of stronger and lighter structures.
Strenx 600 MC600650820161.10.33/0.212.0-10.0
Strenx 650 MC650700850141.20.34/0.222.0-10.0
Strenx 700 MC700750950121.20.39/0.252.0-10.0
Strenx 700 MC+700750950131.00.38/0.243.0-12.0
Strenx 900 MC900930120083.00.50/0.513.0-10.0
Strenx 900 +9009301200113.00.50/0.343.0-6.0
Strenx 960 MC960980125073.50.51/0.283.0-10.0
Strenx 960 MC960980125073.50.51/0.283.0-10.0
Strenx 960 +9609801250103.50.50/0.343.0-6.0
Strenx 1100 MC11001200146064.00.50/0.343.0-8.0
Cold-rolled Strenx steel – high-strength structural steel for the manufacture of stronger and lighter structures.
Strenx 700 CR70010012007(4)2.00.40/0.290.70-2.10
Strenx 960 CR960120014003(4)3.50.39/0.280.70-2.10
Strenx 1100 CR1100130015003(4)3.50.41/0.300.70-2.10
1. Ksi
2. Ductility A(50)Min.
3. Inches
4. Ductility A(80)Min.
5. CEV=C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15; CET=C+(Mn+Mo)/10+(Cr+Cu)/20+Ni/40

 
 
 
 

STRENX HOLLOW SECTIONS

QualityYield strength [MPa]Notch toughnessYield strength/stress [MPa]Carbon equivalentWall thickness [mm]
MinMinMax
Strenx hollow sections – improved high-strength cold-moulded hollow sections.
Strenx Section 65065027J/-40°7009500.24/0.222.50-10.0
Strenx Section 70070027J/-40°7509500.38/0.242.50-10.0
Strenx Section 90090027J/-40°93012000.51/0.283.6-6.0
1. CEV=C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15; CET=C+(Mn+Mo)/10+(Cr+Cu)/20+Ni/40

 
 
 
 

STRENX STEEL SECTIONS

QualityYield strength [MPa]Notch toughnessYield strength/stress [MPa]Carbon equivalentThickness [mm]
MinMinMax
Strenx sections – improved high-strength hollow sections
Strenx Tube 700QLH70040J/-40°7809300.48/0.342.3-6.3
Strenx Tube 700MLH70027J/-50°7509500.38/0.243.0-10.0
Strenx Tube 700MH70040J/-20°7509500.38/0.243.0-8.0
Strenx Tube 900MH90040J/-20°93012000.50/0.254.0-6.0
Strenx Tube 960MH96040J/-20°98012500.51/0.284.0-6.0
1. CEV=C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15; CET=C+(Mn+Mo)/10+(Cr+Cu)/20+Ni/40